Shantou Scene Electronics Co., Ltd

Date: 22nd July 2016
Aluminium housing S-SD6PX-W
Please strictly follow the below instructions when install this product!1. Description? Accurate constant circuit drive develops excellent performance of LED; Using high power LED, high efficacy and long service life;?? Fill light for night vision camera?? Indoor/outdoor use? Easy installation2. SpecificationQuantity of LED6PCS 2W High Power LEDColor TemperatureCool white, warm whiteLuminous Flux600lmBeam angle15?- 90?White Light Distance60m-8mDay/night?switchAutoWorking VoltageIEEE 802.3af PoEPower consumption11W (LED)CableCat.5e 45cm(1.4 ft.)OutputDC12V 1APanelTempered glass panelHousingAluminum Die Casting HousingBracketMount bracketWorking temperatures-20? to +50?(-50? to +50? with heater)Protection LevelIP65ColorWhiteN.W4KGG.W4.5KGPacking dimension540*265*225mmBracket (options)Material: Aluminium AlloySize: 360*90*90mmN.W./G.W.: 0.4kg/0.7kg3. Installation1. The product includes fragile parts. Take care on every transportation steps and hold carefully, do not stress!2. Ensure operating voltage and current are proper before installation.3. Install the product on the holder by fixing the mount hold with screws directly. 4. Adjust the angle of product by loosing screws on bracket. 5. Link power wires tightly and make it waterproof to avoid electric shock.6. Connect with extra power wire should make it waterproof at the same. 7. The outlet of power wire should be installed downward.8. Don't use against any fire precaution rules during operation. 9. Installation requested professional operation and qualified personnel.10. Connect our sales person if you need additional parts for installation.Maintenance 1. Cut off power before maintenance.2. Clean the glass regular to get better transmission of light. 3.Clean the housing to get well heat dissipation performance. 4. Clean by dry dishcloth, don't use water or strong corrosive solution.Night vision picturesNight time with white lightNight time without white light4. Installation and adjustment(1). Internal Picture2. InstallationA. Put on the camera on the lift and tilt, adjust the height of camera and fix the screws.B. Connect the power cable of IP camera to Camera Power Supply Port, it?s supplied with DC12V (Default) or AC24V or AC220V optional. C. Connect the DATA cable of IP camera to the DATA Port.D. Connect the PoE Input Port to PoE power supply.E. If the IP Camera has only one cable for both PoE/DATA, then connect it to another PoE power supply.F. APU Input DC41-57V is to in case that no PoE power supply is available; power this housing with DC41-57V power can turn it on.(3). Dimension of inside camera?5. Dimension6. Models for selectionModelBeam?AngleWhite Light DistanceS-SD6PX-15-W15?60mS-SD6PX-30-W30?35mS-SD6PX-45-W45?25mS-SD6PX-60-W60?15mS-SD6PX-90-W90?8m* White light distance is tested by SONY 1/3" CCD Camera. To achieve the distance needed, please pay attention to your camera specification and lens before purchase. It is normal phenomenon that distance may vary due to different cameras and lens.?Our product is weatherproof and dustproof. Do not modify the shape, dismantle or reconfigure the product, any inflow of water cause by which are not be responsible for warranty repair.
Latest News
Contact Information



East Side, 9/F, Chenhui Bldg., No.7 Keji Road(W), Hi-Tech Development District, Shantou, China
shantou, 515041


Contact Form